319
1. VOICE COMMAND SYSTEM OPERATION
VOICE COMMAND SYSTEM
LS460_600h_Navi_U
5
1 Press the talk switch.
2 Say the tab selection command or se-
lect the desired tab.
Commands related with each function are
displayed on the screen of the each func-
tion tab. Some commonly used commands
are displayed on the screen of the shortcut
tab. Say “More Hints” to display more com-
monly used commands.
3 Say the desired command.
Registered POIs, registered names in the
contacts list etc., can be said in the place of
the “<>” next to the commands. (P. 3 2 5)
For example: Say “Find nearby dining”,
“Call John Smith” etc.
If a desired outcome is not shown, or if no
selections are available, perform one of the
following to return to the previous screen:
•Say “Go back”.
• Select “Go Back”.
• Press the back switch on the steering
wheel.
To cancel voice recognition, select
, or press and hold the talk switch.
VOICE COMMAND SYSTEM
OPERATION
The voice command system is operated
by speaking commands corresponding
to each function. Also you can confirm
the each command by selecting a tab.
The tabs are found on the upper part of
the screen.
All commands that are not displayed on
the screen can be recognized on any
screens.
Voice guidance for the voice command
system can be skipped by pressing the
talk switch.
Saying “Help” prompts voice guidance to
offer examples of commands and opera-
tion methods.
To Next Page
Loading...
