320
1. VOICE COMMAND SYSTEM OPERATION
LS460_600h_Navi_U
■ DISPLAYING THE “Voice Settings”
SCREENS
Selecting can be displayed the
“Voice Settings” screen. (P. 65 )
1 Press the talk switch.
2 Say “Launch <application name>”.
LEXUS App Suite application screen is dis-
played.
1 Press the talk switch.
2 Say “Enter an address”.
3 Say “<house number, street name, city
name, State>” continuously.
●If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
●If a voice command cannot be recog-
nized, voice guidance will say “Pardon?”
(“Command not recognized.” will be dis-
played on the screen) and voice com-
mand reception will restart.
●If a voice command cannot be recog-
nized 2 consecutive times, the voice
command guidance system will say
“Paused. To restart voice recognition,
please push the talk switch. To cancel
voice recognition, please push and hold
the talk switch.” Then voice recognition
will be suspended.
●“Voice Recognition Prompts” can be set
to on or off on the “Voice Settings”
screen. (P. 6 6 )
●Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.
●The side display cannot be operated dur-
ing voice recognition.
VOICE COMMAND
EXAMPLE: LAUNCH LEXUS
App Suite APPLICATION*
VOICE COMMAND
EXAMPLE: PERFORMING A
DESTINATION SEARCH BY
ADDRESS (ENGLISH ONLY)*
To Next Page
Loading...
