53
2. Bluetooth
®
SETTINGS
LS460_600h_Navi_U
BASIC FUNCTION
2
■ RECONNECTING THE Bluetooth
®
PHONE
If a Bluetooth
®
phone is disconnected on
purpose, such as turning it off, this does not
happen. Reconnect the Bluetooth
®
phone
manually.
1 Display the “Bluetooth* Setup” screen.
(P. 48)
2 Select the desired device to be edited.
3 Select “Device Info”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
If a Bluetooth
®
phone is disconnected
due to poor reception from the
Bluetooth
®
network when the engine
<power> switch is in ACCESSORY or
IGNITION ON <ON> mode, the sys-
tem automatically reconnects the
Bluetooth
®
phone.
EDITING THE Bluetooth
®
DEVICE INFORMATION
The Bluetooth
®
device’s information
can be displayed on the screen. The dis-
played information can be edited.