Lexus LS460 - Disabling the Seat Return Function

175
3-3. Adjusting the seats
3
Operation of each component
LS460_EE (OM50D49E)
Pressing the “C” button will dis-
able the seat position recall or
seat return function.
The indicator light comes on when
the function is disabled.
Pressing the button again will
enable the seat position recall or
seat return function.
 Seat return function linked to the door opening operation
 Operating conditions
The engine switch is in IGNITION ON mode.
 Canceling operation partway through
During the seat return operation, performing either of the following actions
cancels the operation:
• Pressing the “SET”, “M” or “C” button
• Pressing any of the seat adjustment switches
 Seat return operation after turning the engine switch off
The seat will automatically return to the neutral position if the door is
opened within approximately 45 seconds of the engine switch being turned
off.
Disabling the seat return function
CAUTION
 Seat adjustment caution
Take care during seat adjustment so that the rear passengers do not strike
the front seats.