Lexus LS460 - Follow Me Home System; Turning on the High Beam Headlights

231
4-3. Operating the lights and wipers
4
Driving
LS460_EE (OM50D49E)
With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with
the headlights on or off.
This system allows the headlights, tail, license plate and front posi-
tion lights to be turned on for 30 seconds when the engine switch is
off.
Pull the lever toward you and
release it with the light switch in
or after turning the
engine switch off.
The lights are turned off in the following situations.
 The engine switch is turned to IGNITION ON mode.
 The light switch is turned on.
 The light switch is pulled toward you and then released.
Turning on the high beam headlights
1
2
Follow me home system