219
4-2. Driving procedures
4
Driving
LS460_EE (OM50D49E)
To drive using temporary shift range selection, operate the “-” or
“+” paddle shift switch while the shift lever is in the D position.
Changing the shift range allows restriction of the highest gear, pre-
venting unnecessary upshifting and enabling the level of engine
braking force to be selected.
When the “-” paddle shift switch is operated, the shift range is down-
shifted to a range that enables engine braking force that is suitable to driv-
ing conditions.
Upshifting
Downshifting
The selected shift range, from D1
to D8, will be displayed in the
meter.
To return to normal D position
driving, the “+” paddle shift switch
must be held down for a period of
time.
Shift ranges and their functions
A lower shift range will provide greater engine braking forces than a
higher shift range.
Selecting shift ranges in the D position
Meter display Function
D2 - D8
A gear in the range between 1 and the selected gear
is automatically chosen depending on vehicle speed
and driving conditions
D1 Setting the gear at 1
To Next Page
Loading...
