Lexus LS460 - Engine (Ignition) Switch; Starting the Engine; Driving Procedures

207
4
Driving
LS460_EE (OM50D49E)
4-2. Driving procedures
Turn the engine switch to IGNITION ON mode (P. 208) and
check that the parking brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
The engine switch indicator will turn green. If the indicator does not turn
green, the engine cannot be started.
Press the engine switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal until the engine is com-
pletely started.
The engine can be started from any
engine switch mode.
Engine (ignition) switch
Performing the following operations when carrying the electronic
key on your person starts the engine or changes engine switch
modes.
Starting the engine
1
2
3
4