696
5-6. Using the hands-free phone system (for cellular phone)
LS460_EE (OM50D49E)
If multiple Bluetooth
®
phones are registered, follow the procedure
below to select the Bluetooth
®
phone to be used. You can only use
one phone at a time.
Display the “Bluetooth*” screen. (P. 689)
Select “Connect telephone” on the “Bluetooth*” screen.
Choose the phone to be con-
nected.
The Bluetooth
®
mark is displayed
when you connect the phone.
If a completion message is dis-
played, connection is complete.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
When another Bluetooth
®
device is connected during registering or selecting
a phone
When another Bluetooth
®
device is connected, a confirmation message will
be displayed. If you want to disconnect it, select “Yes”.
The currently connected Bluetooth
®
phone’s screen button will have a
Bluetooth
®
mark displayed on it. If the currently connected Bluetooth
®
phone’s screen button is selected, the Bluetooth
®
phone can be discon-
nected. Select “Yes” to disconnect.
Connecting the phone while Bluetooth
®
audio is playing
Bluetooth
®
audio will stop temporarily.
Selecting a Bluetooth
®
phone
To Next Page
Loading...
