238
4-3. Operating the lights and wipers
LS460_EE (OM50D49E)
When all of the following conditions are fulfilled, high beam will
be automatically turned on (after approximately 1 second):
• Vehicle speed is above approximately 60 km/h (37 mph).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights
or tail lights turned on.
If any of the following conditions are fulfilled, low beam will be
automatically turned on, depending on the location of oncoming
or preceding vehicles:
• Vehicle speed drops below approximately 40 km/h (25 mph).
• The area ahead of the vehicle is not dark.
• Preceding vehicles are moving quickly and high beams may
blind the drivers of the other vehicles.
When all of the following conditions are fulfilled, variable shade
beam will be automatically turned on, depending on the location
of oncoming or preceding vehicles:
• Vehicle speed is above approximately 60 km/h (37 mph).
• The area ahead of the vehicle is dark.
High beam, low beam and variable shade beam automatic
turning on conditions
To Next Page
Loading...
