269
4-5. Using the driving support systems
4
Driving
LS460_EE (OM50D49E)
Press the “ON•OFF” button to
activate the cruise control.
Radar cruise control indicator will
come on.
Press the button again to deactivate
the cruise control.
Accelerate or decelerate the
vehicle to the desired speed,
and push the lever down to set
the speed.
“SET” indicator will be displayed.
The vehicle speed at the moment
the lever is released becomes the
set speed.
If this is performed when vehicle
speed is less than about 50 km/h
(30 mph) and the vehicle ahead
can be detected, your vehicle will
start following the vehicle ahead of
you at a set speed of about 50 km/h
(30 mph) (vehicle-to-vehicle dis-
tance control mode only).
Setting the vehicle speed (vehicle-to-vehicle distance control
mode)
To Next Page
Loading...
