Lexus LS460 - Page 886

856
7-2. Steps to take in an emergency
LS460_EE (OM50D49E)
Attach the 2 stickers as shown.
Remove any dirt and moisture
from the wheel before attaching
the label. If it is impossible to
attach the label, make sure to tell
any authorized Lexus dealer or
repairer, or another duly qualified
and equipped professional when
you have them repair and replace
the tire that sealant is injected.
Check the specified tire infla-
tion pressure.
Tire inflation pressure is specified
on the label as shown. (P. 899)
Start the engine. (P. 207)
To inject the sealant and
inflate the tire, turn the com-
pressor switch on.
9
10
11
12