324
4-5. Using the driving support systems
■ RCTA function detection areas
The areas that vehicles can be
detected in are outlined below.
The buzzer can alert the driver of
faster vehicles approaching from far-
ther away.
Example:
■ The RCTA function is operational when
The RCTA function operates when all of the
following conditions are met:
● The power switch is in ON.
● The RCTA function is on.
● The shift position is in R.
● The vehicle speed is less than approxi-
mately 9 mph (15 km/h).
● The approaching vehicle speed is
between approximately 5 mph (8 km/h)
and 34 mph (56 km/h).
■ Setting the buzzer volume
The buzzer volume of the RCTA, intuitive
parking assist, and RCD can be adjusted all
together through a customize setting.
(P.677)
■ Muting a buzzer temporarily
When an object is detected, the temporary
mute switch is displayed on the multimedia
display.
Select the switch to mute the buzzer of the
intuitive parking assist, RCTA, and RCD all
together.
Mute will be canceled automatically in the
following situations:
● When the shift position is changed.
● When the vehicle speed exceeds a cer-
tain speed.
● When there is a malfunction in a sensor
or the system is temporarily unavailable.
● When the operating function is disabled
manually.
● When the power switch is turned off.
■ Conditions under which the system will
not detect a vehicle
The RCTA function is not designed to
detect the following types of vehicles
and/or objects:
● Vehicles approaching from directly
behind
● Vehicles backing up in a parking space
next to your vehicle
● Vehicles that the sensors cannot detect
due to obstructions
Approaching vehi-
cle speed
Approximate
alert distance
34 mph (56 km/h)
(fast)
98 ft. (30 m)
5 mph (8 km/h)
(slow)
13 ft. (4 m)
To Next Page
Loading...
