422
4-5. Using the driving support systems
enabled
*
Set the moving object alert display on/off
when the automatic display mode is ON.
*
: If equipped
■ Suspension of the settings display
For safety purposes, you cannot display the
custom settings screen while the vehicle is
moving.
Observe the following precautions.
Failure to do so may result in an unex-
pected accident. Also, when driving,
make sure to directly confirm the
safety of your surroundings and the
area to the rear of the vehicle.
When using the Multi-terrain
Monitor
■ Conditions under which the Multi-
terrain Monitor should not be used
Do not use the Multi-terrain Monitor in
the following situations. The system may
not operate properly, resulting in an
unexpected accident.
● On icy or slick road surfaces, or in
snow
● When using tire chains or emergency
tires
● When the front door(s) or back door
are not closed completely
● On roads that are not flat, such as hills
● If the tires of a size other than specified
by Lexus are installed
● If the suspension has been modified
● If a non-Lexus product is installed on
the area displayed on the screen
■ Guide lines
The tire position indicator lines and vehi-
cle position indicator lines may differ
from actual vehicle positions depending
on the number of passengers, cargo
weight, road grade, road surface condi-
tions, brightness of the surrounding envi-
ronment, etc. Always drive the vehicle
while confirming the safety of your sur-
roundings.
■ Panoramic view
● See-through view, moving view, pan-
oramic view, side clearance view, and
cornering view produce an image that
is a composite of images captured by
the front camera, rear camera, and
side cameras. As there is a limit to the
displayable range and content, make
sure you fully understand the features
of the Multi-terrain Monitor before
you use it.
● The four corners of the see-through
view, moving view, panoramic view,
side clearance view, and cornering
view have a video composition pro-
cessing region centered on borders of
the cameras, and image clarity may
decline. However this is not a fault.
● Depending on lighting conditions near
each camera, bright and dark patches
may appear on the see-through view,
moving view, panoramic view, side
clearance view, and cornering view.
● See-through view, moving view, pan-
oramic view, side clearance view, and
cornering view does not extend higher
than the installation position and image
capture range of each camera.
● There are blind spots around the vehi-
cle and as such there are regions not
displayed on the Multi-terrain Moni-
tor.
To Next Page
Loading...
