526
5-6. Using the other interior features
A portable device can be charged by
just placing Qi standard wireless
charge compatible portable devices
according to the Wireless Power Con-
sortium, such as smartphones and
mobile batteries, etc., on the charge
area.
The compatible portable devices can
be found on the following Wireless
Power Consortium website.
https://www.
wirelesspowerconsortium.com/
This function cannot be used with por-
table devices that cannot be placed on
the wireless charger. Also, depending
on the portable device, it may not
operate as normal. Please read the
operation manual for portable devices
to be used.
■ The “Qi” logo
The Qi logo is a trademark of the
Wireless Power Consortium. Qi ID:
11277
■ Name for all parts (front)
Operation indicator light
Charge area
*
Charging tray
Approximately 1.0 in. (2.5 cm)
Approximately 3.9 in. (10 cm)
*
: The charging coil in the wireless charger
can be moved within the charge area up
to the position of the charging coil inside
a portable device. Charging is possible if
the center of the coil of the portable
device is placed within the charge area.
If 2 or more portable devices are placed
on the wireless charger, their charging
coils may not be properly detected and
they may not be charged.
■ To prevent damage to external
devices
● Do not leave external devices in the
vehicle. The temperature inside the
vehicle may become high, resulting in
damage to an external device.
● Do not push down on or apply unnec-
essary force to an external device or
the cable of an external device while it
is connected.
■ To prevent 12-volt battery discharge
Do not use the USB Type-C charging
ports for a long period of time with the
hybrid system stopped.
Wireless charger (if equipped)
A
B
C
D
To Next Page
Loading...
