582
6-3. Do-it-yourself maintenance
adjusted to the specified level, perform
the tire inflation setting procedure by
selecting specified inflation pressure
on the multimedia display. (P.582)
When the tire inflation pressure is to be
other than specified, such as when tires
other than the specified size are used,
etc., set the tire inflation pressure using
the current pressure. Make sure to
adjust the tire inflation pressure of each
tire to the appropriate level before
performing tire pressure setting. The
tire pressure warning system operates
based on this tire inflation pressure.
(P.582)
■ Setting by selecting a specified tire
inflation pressure
1 Start the hybrid system.
The tire inflation pressure cannot be set
while the vehicle is moving.
2 Select on the multimedia dis-
play.
3 Select “Vehicle customize”.
4 Select “Tire pressure”.
5 Select “Set indicated air pressure”
and then select the desired front
and rear tire pressures.
6 Select “OK”.
The tire pressure warning light will slowly
blink 3 times.
After setting the tire inflation pressure, a
message indicating that setting has been
completed will be displayed on the multi-
information display.
■ Setting using the current tire infla-
tion pressure
1 Adjust the tire inflation pressure of
each tire to the appropriate level.
Make sure to adjust the tire inflation pres-
sure with the tires cold.
2 Start the hybrid system.
The tire inflation pressure cannot be set
while the vehicle is moving.
3 Select on the multimedia dis-
play.
4 Select “Vehicle customize”.
5 Select “Tire pressure”.
6 Select “Set current air pressure”.
7 Select “Continue”.
The tire pressure warning light will slowly
blink 3 times and a message indicating that
tire inflation pressure is being set will be
displayed on the multi-information display.
After setting the tire inflation pressure, a
message indicating that setting has been
completed will be displayed on the multi-
To Next Page
Loading...
