LG BD430 - Technical Specifications

62
Appendix
Technical Specications
Mechanical properties
Dimensions (W×H×D ) 327.4 mm x 241mm x 90.9mm (not including the adjustable feet)
Net Weight 2.9kg
Adjustable foot 10°
Monitor’s resolution
LCD system 0.63" TFT , active matrix, 3-panel (for BD430, BD450 and BD470)
0.59" TFT , active matrix, 3-panel (for BD460)
Monitor’s resolution 1024 x 768 dots(for BD430, BD450 and BD470)
1280 x 800 dots(for BD460)
Compatible signals
Color standard PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N
HDTV signal 480i, 480p, 576i ,576p,720p and1080i
Scanning frequency Horizontal frequency: 31kHz-80kHz, Vertical frequency: 56Hz-85Hz
Optical elements
Image size (diagonal lines) 30"-300", adjustable
Projection distance WIDE:0.875m~8.943m TELE:1.054m~10.737m(BD430,BD450,BD470)
WIDE:0.936m~9.556m TELE:1.128m~11.478m(BD460)
Lens F=2.1 ~2.3,1.2x optics, f=18.82~22.60mm with manual zoom and focus.(BD430)
F=1.58 ~1.75,1.2x optics, f=18.85~22.63mm with manual zoom and focus.
( BD450, BD460 and BD470)
Lamp power 230w
Terminal
Component input terminal RCA x 3
S-video input terminal DIN 4-pin x 1
RGB IN 1 terminal D-sub 15-pin x 1
RGB IN 2 / RGB OUT terminal D-sub 15-pin x 1
VIDEO input terminal RCA x 1
AUDIO IN L(MONO)/R terminal RCA x 2
HDMI terminal HDMI A interface 19-pin x 1
AUDIO IN terminal Mini plug(stereo) x 1
AUDIO OUT terminal Mini plug(stereo) x 1
RS-232C terminal D-sub 9-pin x 1
Audio
Internal audio amplier 2W x 2 stereo
Built-in speaker 2W RMS 4Ω x 2
Power supply
Voltage and power consumption AC 100–240 V(Max. 3.8A),50/60 Hz
Operating environment
Operating temperature 41°F~95°F (5°C~35°C)
Operating Humidity 0 ~ 80 %
Storage temperature -4°F~140°F (-20°C~60°C)
Storage Humidity 0 ~ 85 %
Remote control
Battery AAA or LR03 1.5V alkali battery x 2
Effective area 16.4' (5 m)/±30
Dimensions 52mm (W) x 18mm (H) x 110mm (D)
Net weight 67g (including battery)
● The aforesaid specication is subject to change without prior notice.
● Liquid crystal panel is made on the basis of high standard, where 99.99% of the pixels are effective.
Due to the nature of the liquid crystal panel, a fraction of the pixels (0.01% or less) may be ineffective.