SAFETY INSTRUCTIONS
10
• Ventilate the product room from time to time when operating it
together with a stove, or heating element etc.
− Oxygen deficiency can occur and hence harm your health.
• Turn the main power off when cleaning or repairing the product.
− There is risk of electric shock.
• Take care to ensure that nobody especially kids could step on or
fall onto the unit.
− This could result in personal injury and product damage.
• Take care to ensure that power cable could not be pulled out or
damaged during operation.
− There is risk of fire or electric shock.
• Do not touch any electric part with wet hands. you should be cut
power before touching electric part.
− There is risk of electric shock or fire.
• Do not touch refrigerant pipe and water pipe or any internal
parts while the unit is operating or immediately after operation.
− There is risk of burns or frostbite, personal injury.
• If you touch the pipe or internal parts, you should be wear
protection or wait time to return to normal temperature.
− Otherwise , it may cause burns or frostbite, personal injury.
• Do not touch leaked refrigerant directly.
− There is risk of frostbite.
• Make sure to install mixing valve (field supply). The mixing valve
is limiting the water temperature. The hot water temperature
maximum values shall be selected according to the applicable
legislation.
• Do not heated to a temperature of more than provided by the
product.
− Otherwise, it may cause fire or damage of product.
To Next Page
Loading...
Need help?
General