OPERATION SETTING
26
Heating operation
• The desired temperature can be controlled in the units of 1 °C.
− Set the desired temperature higher than the water temperature.
− Water temperature is displayed on the default screen of the remote controller.
− If your unit is operating in heating mode and you press the [On/Off] button the heating
operation will shut off.
NOTE
In the heating operation, temperature setting range vary by model.
• You can select the desired temperature in the range of 15 °C ~ 75 °C.
• When the electric backup heater is not used, the minimum temperature of the water
temperature can be set from 34 °C to 20 °C.
To Next Page
Loading...
Need help?
General