ENGLISH
TEMPERATURE SETTING
23
TEMPERATURE SETTING
Controlling desired temperature
You can easily control to the desired temperature.
• In the main screen, press [L , M (left/right)] button to select the desired temperature category,
and press [J , K (up/down)] button to set the desired temperature.
− In the cooling, heating, and AI/auto mode, the desired temperature control is possible.
Setting Description
Room temperature
Room temperature setting is available when remote room air
sensor (sold separately) is installed.
Room temperature
(Circuit1 & Circuit2)
Temperature of Circuit1 and Circuit2 can be set respectively, when
2nd circuit option is activated in installer mode.
Leaving water temperature
If the desired temperature is lower than the water temperature,
the heating is not performed.
Set the desired temperature higher than the water temperature.
(In cooling mode desired temperature is higher than the water
temperature, the cooling is not performed.)
DHW tank temperature
DHW tank temperature setting is available when DHW tank is
installed.
Water inlet temperature
This operation is changed to the temperature sensor only, the
inlet temperature sensor, and temperature control logic is the
same as the leaving water temperature operation.
NOTE
• The function can be activated according to the installer setting.
• Circuit 1 = Direct circuit
• Circuit 2 = Mixing circuit
To Next Page
Loading...
Need help?
General