SCHEDULE SETTING
36
Schedules & Edit – Add schedule
Description of each stage in Add schedule
Stage 1. Period setting Stage 2. Day of week setting
Stage 3. Time setting Stage 4. Operation setting
Add schedule is completed
• In ‘Stage 1’, it sets the period to perform the timer.
• In ‘Stage 2’, it sets the day of week to perform the timer.
− You can select ‘Everyday / Weekend / Weekdays / Individual selection’.
• In ‘Stage 3’, it sets the start time for the timer.
• In ‘Stage 4’, it sets the timer operation information.
− If ‘Stop’ is selected, you cannot set the mode / temperature.
When stages 1~4 are completed, along with the message of ‘schedule is added’, it moves to View and
edit schedule screen.
To Next Page
Loading...
Need help?
General