LOCK SETTING
32
LOCK SETTING
How to enter Lock setting
Lock setting – all, on/off, mode, DHW lock
• It is the function to lock the button operation of the remote controller so that children or other
persons cannot use it without permission.
• It is the function to limit the desired temperature range that can be set in the wired remote
controller.
Mode Description
All Lock It locks all button operation of the remote controller.
On/Off Lock It locks the On/Off button operation of the remote controller.
Mode Lock It locks the operation mode button operation of the remote controller.
DHW Lock It locks the DHW On/Off button operation of the remote controller.
NOTE
• DHW lock is not used when the DHW tank is not installed.
• In the central controller, when the central control temperature range lock is set, the wired
remote controller’s temperature lock setting is cleared.
• The temperature change by external equipment is reflected regardless of the remote
controller temperature range lock.
To Next Page
Loading...
Need help?
General