ENGLISH
SAFETY INSTRUCTIONS
13
• Keep level even when installing the product.
− To avoid vibration or noise.
• Do not install the product where the noise or hot air from the unit
could damage or disturb the neighborhoods.
− It may cause a problem for your neighbors and hence dispute.
• Always check for gas (refrigerant) leakage after installation or
repair of product.
− Low refrigerant levels may cause failure of product.
• Do not use the product for special purposes, such as preserving
foods, works of art, etc. It is a consumer heat pump, not a
precision refrigeration system.
− There is risk of damage or loss of property.
• Do not block the inlet or outlet of air flow.
− It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents
or splashing water etc.
− There is risk of fire, electric shock, or damage to the plastic
parts of the product.
• Do not step on or put anything on the product.
− There is risk of personal injury and failure of product.
• Do not insert hands or other objects through the air inlet or
outlet while the product is operating.
− There are sharp and moving parts that could cause personal
injury.
• Be cautious when unpacking and installing the product.
− Sharp edges could cause injury.
• If the refrigerant gas leaks during the repair, do not touch the
leaking refrigerant gas.
− The refrigerant gas can cause frostbite (cold burn).
To Next Page
Loading...
Need help?
General