OPERATION SETTING
28
NOTE
• The Auto temperature (set by Installer) can be adjusted if needed.
• -5 ~ -1: The preset temperature curve is lowered by 1 to 5 degrees.
• AI: Preset is kept.
• 1 ~ 5: The preset temperature curve is lifted by 1 to 5 degrees.
• <Temperature adjust step (unit : degrees)>
-5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5
Colder Warmer
• Refer to Installer manual for detailed explanation and guidance how to set the weather-
dependent operation.
To Next Page
Loading...
Need help?
General