General Functions
7016D & 7024D User Guide | General Functions 24
Messaging
Leaving a Message Wait Notification
It is possible to inform a called party (Internal) that you
have tried to contact them).
Calling a Busy Station
1. Your screen will appear as in Fig.25.
2. Press under MSG or press button.
3. When the busy part hangs up you will be notified
with intermittent bursts of tone, a display as in Fig.26 a
flashing button.
Calling an Unanswered Station
Simply press under MSG or press the
button and hang .
They will see from their display that you have tried to
call.
Note: If voicemail is present for either scenario you will
invited to leave a voice message.
Fig.25
BUSY : ANDY
[CALLBK] CAMP (*) STEP
MSG CAMP-ON FLASH
Fig.26
CALL BACK FROM ANDY
22 NOV 04 11:34 am
DND
To Next Page
