Ring
7016D & 7024D User Guide | Ring 37
Answer Mode
1. Press the button and select option [1] RING followed
by option [2] ANSWER MODE. (See Fig.31)
(1) Handsfree – In this mode you will receive 3 short bursts of
tone from your handset for intercom calls before being
connected in a full handsfree conversation.
(2) Tone – This is the default answer mode for intercom calls
to your handset. You will receive normal ringing.
(3) Privacy – In this mode you will receive 3 short bursts of
tone from your handset for intercom calls. The caller will then
be able to announce themselves to you but will not be able to
hear anything at your end of the call
2. Select your option and press OK to save the changes.
Navigation Button Alternative:
1. Select MENU option by pressing S
2. Press OK to select option 1 – BASIC PROGRAM.
3. Use T to scroll down to option 3 and press OK to select.
4. Chose the appropriate answer mode by following the on-
screen instructions.
5. Press OK or under OK on screen to update the
changes
ENTER ICM ANS MODE
H(1) T(2) P(3)
Fig.31
To Next Page
Loading...
