LG STB-3000 Setup Guide

26
206-4272
Ez Download Utility
The Ez Download utility, available from the STB Manager / USB Download Menu, enables you to
select multiple les at one time from the les loaded on a USB memory device. You may use this
utility to download any one or all of the following to an STB: a TLX le for conguration purposes,
an STB (CPU) software update, a PTC software update.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• Software update les must be stored in a folder named “LG_DTV” in the root directory of the USB
memory device. TLX les should simply be stored in the root directory of the USB device.
• If the EZ-Manager Wizard appears on the screen when you turn ON the STB/display, you can use
the wizard’s “USB Conguration” option to access the Ez Download utility (see “STB Conguration
Options” and/or “USB Conguration” on pages 18 and 24, respectively, as necessary).
• If the STB is currently in Pass-through Mode and you intend to use the Zoning feature(s) on this
STB for location-specic conguration purposes, make sure to assign the appropriate TV Zone #
and/or Wi-Fi Zone # in the STB when directed to do so in the procedure below.
• When creating les to be downloaded, avoid using special characters (?, &, @, etc.) in lenames.
• Refer to “Custom Master STB Setup” on pages 40 to 42 for information on creating a TLX file
for cloning purposes, and/or refer to “Creating an FTG Conguration File” on pages 49 to 50 for
information on creating an FTG Conguration (.tlx) le for FTG Mode conguration.
• See Reference section, “Updating STB Software using a USB Memory Device,” for further
information on software updates.
Caution: Do not unplug the STB power cord or remove the USB memory device
during a data download, as doing so may cause the STB to malfunction or harm the
USB device, respectively.
Accessing and Using the Ez Download Utility
1. If it is not ON already, turn ON the STB/display panel.
2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you
turn ON the STB/display:
• If the wizard is displayed, you can access the Ez Download utility via the wizard, as indicated
above (see “Before You Begin”). However, to continue with this procedure and access the Ez
Download utility from the STB menus, exit the EZ-Manager Wizard. Then, continue with step 3.
• If the wizard is not displayed, go directly to step 3.
3. If the STB is currently in Pass-through Mode, you would like to transfer (Teach) a TLX le to the
STB via the Ez Download utility, and you intend to use one or both of the STB’s Zoning feature(s),
assign the appropriate TV Zone # and/or Wi-Fi Zone # in the STB at this time. See Reference
section, “Using the STB’s Zoning Features,” for further information.
Note: In order for the proper location-specic TV Zone and/or Wi-Fi Zone prole
data to be applied, the Zone designation(s) must be assigned in the Target STB(s)
BEFORE you continue with the Ez Download utility.
4. Insert the USB memory device with the appropriate le(s) into either of the STB’s USB ports.
(Continued on next page)

LG STB-3000 Specifications

General

Brand	LG
Model	STB-3000
Category	Set-top boxes
Language	English