i
: Switch to the text entry screen.
j
Display message delivery status.
: The other party have read message.
• Reading status can be checked only when
"Use message read function" of both a sender
and receiver are set to ON.
: Message is received on the other party's
device.
(no icon) : Message is sent to the server.
: Sending message failed.
k
: Switch to the voice input screen.
l
: Switch to the map screen.
m
: Select Contacts/Sketch/File sharing.
Note
Short Message Service (SMS) information
• SMS can be also sent to or received from the
parties using overseas network operators. For
countries and overseas network operators
available, refer to NTT DOCOMO website.
• To send to users of overseas network
operators, enter "+", "Country code" and then
"the recipient mobile phone number". If the
mobile phone number begins with "0", enter
the number excluding the rst "0". You can
also send an SMS by entering "010" "Country
code" "Recipient's mobile phone number".
• You cannot send an SMS message to
recipients with " # " or " * " included.
• You cannot send an SMS message to a recipient
whose phone number with 184/186 prexed.
+Message information
• To use +Message application via international
roaming, set Enable +Message service while
roaming to ON (it is set to OFF by default).
Also, set Data roaming in the terminal to ON.
• Before receiving messages, activate
"+Message" application and agree with the
+Message terms of use, etc. even if you have
used +Message on the previous terminal
before model change or MNP transfer.
127
Mail/Web Browser
To Next Page
Loading...
