Charging with DC Adapter 05
The DC adapter 05 (optional) supplies power
to charge this terminal through an accessory
socket (12 V/24 V) in a vehicle.
When using the DC adapter 05 for charging,
USB cable A to C 02 (optional) is required.
Refer to the user's guide of DC adapter or USB
cable A to C 02 for details.
Charging with PC
You can charge the terminal by connecting
the terminal to a PC with USB cable A to C 02
(optional).
• For details about connecting with a PC,
refer to "Connecting This Terminal with PC"
(P225).
• The pop-up screen may be displayed by
connecting the terminal to a PC with USB
cable. Select "Cancel" to charge the terminal
without synchronizing with a PC.
• Depending on the terminal conditions, it may
take a while to nish charging, or it may not
be able to charge.
Powering On/O
Powering On
a
Press the power key for 1 seconds
or longer
• This terminal vibrates and the lock screen
is displayed after a while.
• When it is turned on for the rst time,
follow the on-screen instructions to
perform the initial settings (P56).
Powering O
a
Press the power key for 2 seconds
or longer
b
"Power o" → "POWER OFF"
54
Preparations before Using