LG Style 3 - Page 222

■ Pass code (PIN) of Bluetooth
®
function
• Pass code (PIN) of Bluetooth
®
function
is an authentication code to enter when
accessing Bluetooth
®
devices for the
rst time to recognize and permit the
connection each other. Entering the same
pass code (PIN) (up to 16 single byte
alphanumeric characters) on each sending/
receiving device is required.
• On this terminal, pass code may
sometimes be displayed as "PIN".
Turning ON Bluetooth
®
Function to Make This
Terminal Discoverable
a
From the Home screen, tap "Settings"
→ "Connected devices" → "Bluetooth"
b
Turn on "Bluetooth"
Note
• When you do not use Bluetooth
®
function,
turn Bluetooth
®
function o󱐯 to save the
the battery.
• The setting of the Bluetooth
®
ON/OFF
is not changed even when the power is
turned o󱐯.
Changing the name of this terminal
You can change the name of this terminal
displayed on another device when
communicating via Bluetooth
®
communication.
a
From the Home screen, tap "Settings"
→ "Connected devices" → "Bluetooth"
b
Turn on "Bluetooth"
c
→ "Edit phone name"
d
Enter each item → "Save"
220
Data Communication