EasyManuals Logo

Life GE UNI R User Manual

Life GE UNI R
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
3.3.5
PHOTO 1
This function makes it possible to set for the inputs to the terminals 6 - 7 and 6 – 11 one of the following functions:
PHOTO
,
PHOTO
1,
PHOTO
2,
STOP
AND PAUSE
.
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
�
Press
B
followed by
PHOTO 1
:
if green LED
(DX)
is lit:
programming outputs 6-7.
if red LED
(DX)
is lit:
programming outputs 6-11.
Press
B
to reverse terminal programming.
Having selected the input, press
or
to choose the function,
referring to the lighting of the horizontal LEDs according to the
following table:
PHOTO
PHOTO1
PHOTO2
STOP
PAUSE
LED FUNCTION
LED FUNCTION
3.3.6
Close after photo
This function activates the automatic closure of the gate after the beam of the photocell programmed as PHOTO has been crossed; if the gate is opening
it continues the opening motion and only closes again after total opening.
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Press
B
followed by
CLOSE AFTER PHOTO
:
if green LED
(DX)
is lit:
mode enabled,
if red LED
(DX)
is lit:
not enabled, press
B
to enable.
PHOTO
PHOTO1
PHOTO2
STOP
PAUSE
LED FUNCTION
LED FUNCTION
3.3.7
Opening ram blow
This function enables the electrolock and a closure overtravel.
The closure overtravel after the gate is closed helps lock the electrolock, and during opening it helps release.
The closure overtravel is used in closure even without the electrolock in order to keep the leafs well tightened.
EL0018
�
�
Press
A
followed by
OPENING RAM BLOW
:
if green LED
(SX)
is lit:
both the electrolock and overtravel
both the electrolock and overtravel
are enabled.
if red LED
(SX)
is lit:
the electrolock is disabled and the
closure overtravel only can be activated.
Press
A
once again to enable/disable the electrolock.
The overtravel value can be regulated by pressing
and
.
LEDS ON
FUNCTION DISABLED
MINIMUM
MAXIMUM
OVERTRAVEL VALUE
2
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Life GE UNI R and is the answer not in the manual?

Life GE UNI R Specifications

General IconGeneral
BrandLife
ModelGE UNI R
CategoryGate Opener
LanguageEnglish

Related product manuals