The force function regulates the thrust and therefore the speed of the operator. Force is adjusted using the
function automatic exit of programming is not envisaged. To quit force programming press
The force value is set by pressing
This function regulates the pause time before automatic re-closure.
time scale from 5 to 20 seconds on,
time scale from 5 to 20 seconds on,
time scale from 25 to 125 seconds on.
The various times are set by pressing
0 s
5 s
10 s
15 s
20 s
25 s
50 s
75 s
100 s
125 s
The courtesy light function switches on a light during any gate movement. The light can remain on after the last manoeuvre for a settable time of 20 – 200 s.
The various times are set by pressing
20 s
40 s
80 s
120 s
160 s
200 s