liftup FlexStep V2 - 6.10.2 Unlocking Door in Emergency

USER MANUAL – FLEXSTEP V2 – US VERSION 08.02
Liftup North America, Inc. | 5626 56th Commerce Park Blvd | Tampa, FL 33610 | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
21
6.10.2 Unlocking the door in an emergency
In the event of an emergency/breakdown: Release the spring bolt.
1. Pull the spring out of the spindle shaft using
a suitable tool, screwdriver, ruler, bottle
opener etc.
2. You can access the lowest part from the
outside.
3. The spring is released.
4. Pull out the bolt once the spring has been
released.
NOTICE:
The bolt may be difficult to pull out due to
pressure from the door actuator.
5. The door is now free to be opened.
Once the fault has been rectified, the door can
be reconnected in line with these instructions
but applied in the reverse order.