liftup FlexStep V2 - 10.8 Acoustic Alarms

USER MANUAL – FLEXSTEP V2 – US VERSION 08.02
Liftup North America, Inc. | 5626 56th Commerce Park Blvd | Tampa, FL 33610 | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
29
10.8 Acoustic alarms
Speak
Activity/warning
Opening
The safety barrier is opening
Closing
The safety barrier is closing
Alarm: Overload
The platform is overloaded
Alarm: Battery fault – lift
cannot be used
There is a battery fault.
Inadequate power supply (see section 5
Technical Specifications)
Alarm:
Item/object under the lift
Remove whatever is under the lift and
preventing downward travel
Alarm:
IR sensors tripped
Remove whatever is under the lift and
preventing downward travel
Alarm:
Item/object under the lift
The transformation from platform into
staircase is not possible as
someone/something is on the platform.
Ding Ding Ding
Arriving at upper/lower level
Ding Ding Ding
The lift has transformed into a staircase
Warning:
Running automatically
Warning that the lift is about to
transform into a staircase.
BEEP-BEEP-BEEP...
The lift is in the process of transforming
into a staircase.
…
Emergency stop pressed
The red emergency stop button has been
pressed. It needs to be released in order
for the lift to be able to operate.
The lift is locked
The lift is locked with the key switch.
Alarm: Battery warning
Low battery level.
Alarm:
Power supply interrupted
– Connect or press
emergency stop
Connect power supply or activate
emergency stop in order to switch off the
staircase.
High-pitched tone followed by a lower pitched tone
Low-pitch tone followed by a higher pitched tone
3 identical tones