USER MANUAL – FLEXSTEP V2 – US VERSION 08.02
Liftup North America, Inc. | 5626 56th Commerce Park Blvd | Tampa, FL 33610 | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
18. Disassembly
In order to ensure the correct disassembly of the lift in order to install it elsewhere, it is
recommended that an authorised service technician be used. Contact your dealer for assistance
with disassembly.
Be aware that there could be a risk of the FlexStep accidentally tilting/tipping over when it is
disengaged from the building.
19. Disposal
The owner is responsible for disposing of the product in accordance with the rules applying at
any time. Be particularly aware that batteries are fitted in the control unit and remote control
and these need to be disposed of separately.
IMPORTANT!
Do not throw the batteries into the waste bin. When you dispose of batteries, local
provisions and regulations must be complied with.
Where necessary, contact your dealer for assistance with disposal.
19.1 Material specification for FlexStep
Included in the following components/parts
1)
Frame, step, frames
2)
, handrails,
Ramp, cover plates, pressure plates, frames
2)
, step inserts
Bushings, gaskets, handrails
Plastic Polyoxymethylene (POM)
Handrail bushings, slide rails, bushings, gaskets
Wood (oak, beech, mahogany, etc.)
Controls/PCB, lift columns
1)
Call stations, call station columns and other external components are not included.
2)
Depending on the model, frames may be made of steel or aluminium.
20. Warranty
The warranty applies in relation to the rules applying to the warranty any time.
Liftup offers a full 2-year warranty on spare parts, provided the product has been registered
with Liftup (http://lpr.liftup.dk/):
To Next Page
Loading...
