EasyManua.ls Logo

liftup FlexStep V2 - 12. Maintenance; 12.1 Battery Replacement

Default Icon
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER MANUAL FLEXSTEP V2 US VERSION 08.02
Liftup North America, Inc. | 5626 56th Commerce Park Blvd | Tampa, FL 33610 | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
32
12. Maintenance
Clean by wiping off with a cloth that has been wrung out in water containing a mild detergent.
Any oiled wooden surfaces must undergo regular maintenance (approx. every 3 months) using
wood oil in order to ensure the wood’s life expectancy is achieved. Varnished wooden surfaces
must have fresh varnish applied as necessary.
The accompanying remote control (optional equipment) must be stored in a dry place and not
be subjected to strong impacts by, for example, throwing it about. It must only be cleaned using
a cloth that has been wrung out.
Perform regular checks under the lift for any leaves, branches or other items/objects and remove
these in order to ensure it travels freely.
12.1 Replacement of battery in call stations/remote control
A CR2032 battery is installed in the wireless call stations, call station column (optional
equipment) and remote control.

Table of Contents

Other manuals for liftup FlexStep V2

Related product manuals