Lightware DP-OPT-TX150 - Detailed Instructions; Establish the Connection; Start the LDU and Follow the Instructions

5. Firmware Upgrade DP-OPT-TX150, DP-OPT-RX150 – User's Manual 26

Detailed Instructions
Establish the Connection
Make sure that the computer and the device are connected via USB. If you connect Transmitter, it must be in
Conguration mode.
Start the LDU and Follow the Instructions
After launching LDU the welcome screen will appear. Pressing the
A
button a list will appear showing the
Extender button on the main screen.
Welcome screen
Step 1. Select the Package.
.lfp
Package information is displayed:
▪ General version info, creation date, short description,
▪ Devices
▪ Components in the package with release notes.
Next button and follow the instructions.
 Files with .lfp extension are associated to LDU during installation. If you double click on




