Lightware HDMI-OPT-TX200R - Hdmi-Opt-Tx100 R Rear View

HDMI-OPT-TX and RX family
User’s Manual
Section 3. Controls and connections Page 17 / 60
3.6. HDMI-OPT-TX100R rear view
Figure 3-4. Rear view
HDMI INPUT Connect one HDMI cable between the HDMI source and the
transmitter unit. For more information see chapter 3.13.1.
SC Fiber Output Connect a multimode single fiber optical cable between the
transmitter unit and the receiver unit (or a Lightware Hybrid
Modular Matrix equipped with optical input card).
DC +5V in Connect the output of the supplied +5V DC power adaptor.
CAUTION! Warranty void if damage occurs due to use of a
different power source. For more information see chapter 4.3.
DC +5V in
3
SC Fiber Output
2
HDMI INPUT
1
2
3
1