Change Audio Input Priority
Command and Response
Parameters
Example
ATTENTION!
Set Level and Direction for Each Pins
section and about the interface in the section.
Command and Response
dirlevel
dirlevel
Parameters
0 - 7
The direction of the communication I:O: output
The level of the pin L:H:T:
Example
#dhcp #ipaddress #network
Command and Response
Parameters
0: static
1:
(four decimal octets separated by dots)
(four decimal octets separated by dots)
Gateway address (four decimal octets separated by dots)
Example
Set the IP Address
Command and Response
Parameters
Example
To Next Page
Loading...
