Limitorque LY Series - Page 2

ii LY Installation and Maintenance for LY 1001, LY 2001 and LY 3001 LMAIM1501
LY Series Installation and Maintenance for LY 1001, LY 2001, and LY 3001
©2003 Copyright Limitorque. All rights reserved.
Printed in the United States of America.
Disclaimer
No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means electronic, mechanical,
photocopying, recording, or otherwise without the written permission of Limitorque. While every precaution has been taken in the
preparation of this book, the publisher assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein.
This document is the proprietary information of Limitorque furnished for customer use ONLY. No other uses are authorized without
written permission from Limitorque.
Limitorque reserves the right to make changes, without notice, to this document and the products it describes. Limitorque shall
not be liable for technical or editorial errors or omissions made herein, nor for incidental or consequential damages resulting from
the furnishing, performance, or use of this document.
The choice of system components is the responsibility of the buyer, and how they are used cannot be the liability of Limitorque.
However, Limitorque’s sales team and application engineers are always available to assist you in making your decision.
This manual contains information that is correct to the best of Limitorque’s knowledge. It is intended to be a guide and should not
be considered as a sole source of technical instruction, replacing good technical judgment, since all possible situations cannot be
anticipated. If there is any doubt as to exact installation, configuration, and/or use, call Limitorque at (434) 528-4400. The latest
revisions to this document are available online at http://www.limitorque.com
Flow Control Division
Limitorque Actuation Systems