LinearX LT360 - Step CCW

19
LT360 Precision Turntable
DLL Programming Manual
■ Class Set (out)
■ Identifier lt_Step_CCW
■ Hex Value 0x1E
■ Call LT360LIB_CmdValue(Handle, lt_Step_CCW, null);
■ Parameter (none)
Description
This command causes the LT360 to move from its current position by the
current step size using counter clockwise rotation. No parameter is re-
quired.
The step command can also be issued from the front panel of the unit, the
LR360 remote, or by the TTL Pulse input on the front panel.
2.3 Step CCW