LinearX LT360 - Technical Support

5
LT360 Precision Turntable
DLL Programming Manual
1.1 Overview of LT360LIB.DLL ........................................................ 7
1.2 Header / Include Files ............................................................ 8
1.3 Opening and Closing a Link ..................................................... 9
1.4 Error Messages ...................................................................... 11
1.5 Using LT360 Commands ..................................................... 16
2.1 Goto CCW .......................................................................... 17
2.2 Goto CW ........................................................................... 18
2.3 Step CCW ..................................................................... 19
2.4 Step CW .................................................................... 20
2.5 Set Smart Torque .................................................... 21
2.6 Set Baud Rate ......................................................... 22
2.7 Set Origin .................................................................... 23
2.8 Set Pulse Direction ........................................................ 24
2.9 Set Pulse Edge ........................................................... 25
2.10 Set Step Size .......................................................... 26
2.11 Set Velocity ........................................................... 27
2.12 Set Torque ............................................................ 28
2.13 Set Acceleration Function .......................................... 29
2.14 Set Name ............................................................... 31
2.15 Set Pulse Input ...................................................... 32
2.16 Set Analog Input ...................................................... 33
2.17 Set Display Polarity ................................................ 34
2.18 Set Input Polarity ................................................... 35
2.19 Set Output Polarity ................................................ 36
2.20 Set Move Abort .................................................... 37
2.21 Set Motor Home Check ......................................... 38
2.22 Set Output Mode .................................................... 39
2.23 Get Name ............................................................... 41
2.24 Get Title ................................................................. 42
2.25 Get Firmware Version ............................................. 43
2.26 Get Firmware Date .................................................. 44
2.27 Get Production Date .................................................. 45
2.28 Get Calibration Date .................................................. 46
Contents
Chapter 1: Overview 7
Chapter 2: Command Reference 17