LinearX LT360 - Set Name

31
LT360 Precision Turntable
DLL Programming Manual
■ Class Set (out)
■ Identifier lt_SetName
■ Hex Value 0x29
■ Call LT360LIB_CmdValue(Handle, lt_SetName, 'xx...xx');
■ Parameter Name
Description
This command sets the Name for the LT360 unit. This is an arbitrary user
name which can be assigned to the unit. This can be useful for applications
which utilize multiple units to distinguish between the units, for example
Horz, Vert, etc. This name is stored in the LT360 and is non volatile.
The Name parameter string has a maximum length of 21 characters.
2.14 Set Name