LinearX LT360 - Get Name

41
LT360 Precision Turntable
DLL Programming Manual
■ Class Get (in)
■ Identifier lt_GetName
■ Hex Value 0x91
■ Call LT360LIB_CmdValue(Handle, lt_GetName, RtnStr);
■ Returns Name string
Description
This command returns the Name for the LT360 unit. This is an arbitrary
user name which can be assigned to the unit. This can be useful for
applications which utilize multiple units to distinguish between the units,
for example Horz, Vert, etc. This name is stored in the LT360 and is
non volatile.
The Name parameter string has a maximum length of 21 characters.
2.23 Get Name