42
LT360 Precision Turntable
DLL Programming Manual
■ Class Get (in)
■ Identifier lt_GetTitle
■ Hex Value 0x92
■ Call LT360LIB_CmdValue(Handle, lt_GetTitle, RtnStr);
■ Returns 'LT360 Precision Turntable'
Description
This command returns the Title of the LT360 unit, which always is LT360
Precision Turntable. This command can be useful if you are writing your
own RS-232 program to control the LT360. This command can be used as
a test to verify that you are communicating with an LT360 unit.
2.24 Get Title
To Next Page
Loading...
