LinearX LT360 - 3.3 Computer Interfaces

23
LT360 Precision Turntable
DLL Programming Manual
■ Class Set (out)
■ Identifier lt_SetOrigin
■ Hex Value 0x22
■ Call LT360LIB_CmdValue(Handle, lt_SetOrigin, null);
■ Parameter (none)
Description
This command resets the rotational origin to that of the current platter
position. No parameters are required, and the platter does not rotate. All
further goto commands will be referenced to this new origin (0.0).
2.7 Set Origin