Linksys LAPN300 User Manual

Isolation
Isolation between
SSIDs
Define whether to isolate traffic between SSIDs. If
enabled, wireless clients in different SSIDs cannot
communicate with each other. Enabled by default.
Advanced Parameters
Worldwide Mode
(802.11d)
Worldwide Mode (802.11d) enables the access point
to direct connected wireless devices to radio settings
specific to where in the world the devices are in use.
Channel Bandwidth
You can select the channel bandwidth manually for
Wireless-
N connections. When it is set to 20MHz, only
20MHz channel is being used.
Guard Interval Select the guard interval manually for Wireless-N
connections. The two options are Short (400
nanoseconds) and Long (800 nanoseconds). The
default is Auto.
CTS Protection
Mode
CTS (Clear-To-Send) Protection Mode boos
ts the
access point's ability to catch all Wireless-G
transmissions, but it severely decreases performance.
By default, CTS Protection Mode is disabled, but the
access point will automatically enable this feature
when Wireless-G devices are not able to transmit to
the access point in an environment with heavy
802.11b traffic.
Beacon Interval The access point transmits beacon frames at regular
intervals to announce the existence of the wireless
network. Enter the interval between the transmissions
of beacon frames. The value range is between 40 and
1000 milliseconds and default is 100 milliseconds.
51

Linksys LAPN300 Specifications

General

Color	multi, white
Wi-Fi Speed	300 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.08 pounds