Lippert SMART BED UNIVERSAL KIT - Page 16

Rev: 12.28.22 Page 16 CCD-0004051
9. Insert the ACS module (Fig. 32B) into the ACS module holder (Fig. 32A). Make sure the ACS module key
(Fig. 32C) is aligned with the ACS module keyway (Fig. 32D) in the ACS module holder. Push and turn
the ACS module until ACS module seats into place (Fig. 32D).
A
B
C
D
10. To hold the ACS module into the ACS module holder, install one #6 x 1/2, 18-8 SST, pan head screw
(Fig. 30N) into the ACS module holder (Fig. 30O).
Fig. 31
Fig. 31 Viewing from underneath, up, towards the end rail frame.
Fig. 32