Lippert SMART BED UNIVERSAL KIT - Page 22

Rev: 12.28.22 Page 22 CCD-0004051
A
C
A
B
A
A
B
11. Wrap the belt (Fig. 43C) over the top of the first belt plate (Fig. 43B). The belt extending up from
the bed frame should be in between the belt mounting bracket and the belt plate.
12. Place the belt plate and the belt onto the posts (Fig. 43A) of the belt mounting bracket.
13. Slide the second belt plate (Fig. 44A) onto the posts (Fig. 44B) of the belt mounting plate,
against the belt.
14. Install the four previously removed M6 - 1.0 mm hex flange nuts (Fig. 45A) onto the belt mounting
bracket posts. Tighten the nuts to 10 ft-lbs.
15. Place a belt mounting bracket cover (Fig. 46A) over the top of the belt mounting bracket (Fig. 46B).
16. Repeat steps 10-15 for the other three belts.
B
Fig. 43 Fig. 44
Fig. 45
Fig. 46