Inverter Bracket (for Split Application)
EPS Plug for backup loads (critical Loads)
Positive & Negative PV Plugs
(One pair for 3kW, Two pairs for 3.68~6kW)
Wi-Fi & Bluetooth integrated Stick
CT (Current Transformer) & CT cable
16pin Multi COM connector for CT/EV charger
Positive & Negative BAT Plugs (one pair)
Expansion bolts for Wall-mounting Bracket
(for Split Application)
Screws for Fixing Mounting Bracket
Water-proof RJ45 Connector for BMS (for Li-Ion battery)
Water-proof RJ45 Connector for DRM port
NTC cable (Temperature sensor for Lead-acid battery)
& PVC tape for NTC cable
Documents (User Manual & Quick Guide & Certificate)
Note: If anything is missing, please contact your local distributor.
To Next Page
Loading...
