19
5. Installation
5.1 Installation Requirements
•
Make sure there is no electrical connection before installation.
•
In order to avoid electric shock or other injury, make sure that holes will not be drilled
over any electricity or plumbing installations.
•
Always follow the instructions when moving or positioning the inverter.
•
Improper operation may cause injuries or serious wounds. In the case of poor
ventilation, the system performance may compromise.
5.1.1 Location Requirements
Select an optimal mounting location for safe operation, long service life and expected
performance.
Note:
•
•
AVOIDE direct sunlight, rain exposure, snow laying up during installation and operation.
•
DO NOT install the inverter in a place where personnel are likely to come into contact with
its enclosure and heat sinks because these parts are extremely hot during operation.
To Next Page
Loading...
